serial device servers features EKI-1351 eki-1352 link any serial device to an ieee 802.11 b/g network supports wireless lan ad-hoc and infrastructure modes provides com port redirection, tcp, udp, and pair connection modes supports baud rate up to 921.6 kbps provides web-based confguration and windows utility allows a max. of 5 hosts to access one serial port supports windows 2000/xp/vista drivers allows a max. of 4 hosts to be accessed as tcp client mode built-in 15 kv esd protection for all serial signals supports dhcp protocol ? ? ? ? ? ? ? ? ? ? specifcations ethernet communications compatibility ieee 802.11b, ieee 802.11g speed 11/54 mbps network mode infrastructure, ad-hoc antenna connector reverse sma free space range open space 100m serial communications port type rs-232/422/485, software selectable no. of ports EKI-1351: 1 eki-1352: 2 port connector db9 male data bits 5, 6, 7, 8 stop bits 1, 1.5, 2 parity none, odd, even, space, mark baud rate 50 bps ~ 921.6 kbps serial signals rs-232: txd, rxd, cts, rts, dtr, dsr, dcd, ri, gnd rs-422: txd+, txd-, rxd+, rxd-, gnd rs-485: data+, data-, gnd protection 15 kv esd for all signals software driver support windows 2000/xp/vista (x86) utility software advantech serial device server confguration utility operation modes com port redirection mode (virtual com) tcp/udp server (polling) mode tcp/udp client (event handling) mode pair connection without ap (peer to peer) mode ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? mechanics dimensions (w x h x d) 37 x 140 x 95 mm enclosure metal with solid mounting hardware mounting din-rail, panel weight EKI-1351: 595g eki-1352: 603g general led indicators system: power, system status wlan: quality, fail, link/active serial: tx, rx reboot trigger built-in wdt (watchdog timer) power requirements power input 12 ~ 48 v dc , redundant dual inputs power connector terminal block power consumption EKI-1351: 3.5 w eki-1352: 4 w environment operating temperature 0 ~ 50 c (32 ~ 122 f) storage temperature -20 ~ 80 c (-4 ~ 176 f) operating humidity 5 ~ 95% rh regulatory approvals emc ce, fcc part 15 subpart b (class b) safety ul (ul60950-1) hazardous location ul/cul class i, division 2 ordering information EKI-1351 1-port 802.11b/g wlan serial device server eki-1352 2-port 802.11b/g wlan serial device server ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? introduction EKI-1351 and eki-1352 are wireless serial device servers that bring rs-232/422/485 to wireless ethernet. they allow nearly any device with serial ports to connect and share an wireless ethernet network. EKI-1351 and eki-1352 provide a quick, simple and cost-effective way to bring the advantages of remote management and data accessibility to thousands of devices that cannot connect to a network. with EKI-1351 and eki-1352, your existing serial devices can be used with the most popular operating systems on the market. there is no need to write special drivers for specifc operating systems. moreover, you can make serial devices communicate with other devices peer-to-peer, without any intermediate host pcs and software programming. that saves a lot of cost and effort. in addition, you can actively request data or issue commands from the rs-232/422/485 side or wireless ethernet side. this data can be sent bilaterally. thus, the EKI-1351 and eki-1352 are especially suitable for remote monitoring environments such as security systems, factory automaton, scada, transportation and more. 1-port rs-232/422/485 to 802.11b/g wlan serial device server 2-port rs-232/422/485 to 802.11b/g wlan serial device server EKI-1351 eki-1352 rohs compliant 2002/95/ec
|